Release wax lotion P-123

Product Description:

This product is a water-based wax lotion developed for plastic demoulding, die casting metal, metal processing and other industries, with excellent release and anti adhesion effects. Compared with traditional release wax lotion, it has higher melting point and hardnessDegree. At the same time, this product has good dry film transparency, and when applied to transparent substrates, it will not affect the original light transmittance of the substrate.

1、 Application Fields

1. Rubber seals

2. Wire and cable

3. Metal castings

4. Resin molding

5. Water based release agents, etc

2、 Technical data

1. Appearance: yellow translucent lotion

2. Emulsification system: anionic/nonionic

3、solid content（%）：35±1

4、PH value（10%水溶液）：8.0-9.0

5、particle size（μm）：D50（100-150）     D90（150-200）

6、Melting point of solid wax℃：80

7、viscosity（mPa.s）：0-800

8. Chemical composition: Polyethylene wax

3、 Usage suggestions

1. The recommended dosage for this product is 10-20%, and the specific amount needs to be determined by the user based on experiments.

2. The product performance and application methods described in this statement are for reference only. Any new use of the product must undergo strict feasibility testing in order to achieve the best possible results.

4、 Packaging specifications

50kg/plastic drum, 120kg/plastic drum, 200kg/plastic drum.

This product is a non flammable and non explosive hazardous material and should be stored in a ventilated and dry environment at 5-30 ℃, avoiding direct sunlight and freezing. After use, the container should be sealed and have a validity period of 12 months.

Back to Contents